TR
EN
image
1,2K
Doç. Dr. Almira Ada Diken Türksayar

Yayınlar & Eserler

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 29

Dimensional stability of additively manufactured dental casts in bio-based resins: Influence of base design and storage conditions

Journal of Dentistry, Cilt: 162, 2025 (SCI-Expanded)

Fabrication and fit accuracy of definitive resin fixed partial dentures additively manufactured using different vat polymerization technologies

Journal of Dentistry, Cilt: 162, 2025 (SCI-Expanded)

Influence of printing parameters on the fabrication and fit accuracy of additively manufactured resin-based definitive three-unit fixed partial dentures

Journal of Dentistry, Cilt: 161, 2025 (SCI-Expanded)

Dimensional stability of maxillary casts made from plant-based resins and additively manufactured with different technologies

Journal of Prosthetic Dentistry, Cilt: 134, Sayı: 3, 2025 (SCI-Expanded)

Effect of different additive manufacturing technologies on the fracture load of 3-unit monolithic zirconia fixed partial dentures: In vitro mechanical evaluation and energy-dispersive spectroscopy analysis

Journal of Prosthetic Dentistry, Cilt: 134, Sayı: 1, 2025 (SCI-Expanded)

Influence of 3D-printed, milled and pressed lithium disilicate on the bond strength to two resin cements: an in vitro study

Journal of Dentistry, Cilt: 157, 2025 (SCI-Expanded)

Evaluation of the fabrication trueness and internal fit of additively manufactured two-piece zirconia abutments with different build orientations compared to subtractively manufactured abutments

Journal of Dentistry, Cilt: 153, 2025 (SCI-Expanded)

Marginal gap of printed, milled, and heat-pressed two-piece polyetheretherketone abutments before and after thermal cycling, and their pull-off bond strength after thermal cycling

Journal of Prosthodontics, 2025 (SCI-Expanded)

Fracture strength of additively manufactured one-piece endodontic crowns in resins for definitive use: Effect of material type, margin configuration, and pulp chamber depth

Journal of Prosthetic Dentistry, 2025 (SCI-Expanded)

The effect of thermomechanical aging on the fracture resistance of additively and subtractively manufactured polyetheretherketone abutments

Journal of Dentistry, Cilt: 149, 2024 (SCI-Expanded)

Effect of 3D printing technology and print orientation on the trueness of additively manufactured definitive casts with different tooth preparations

Journal of Dentistry, Cilt: 148, 2024 (SCI-Expanded)

Comparison of wear and fracture resistance of additively and subtractively manufactured screw-retained, implant-supported crowns

Journal of Prosthetic Dentistry, Cilt: 132, Sayı: 1, 2024 (SCI-Expanded)

Positional accuracy of a single implant analog in additively manufactured casts in biobased model resin

Journal of Dentistry, Cilt: 146, 2024 (SCI-Expanded)

Effect of layer thickness and polishing on wear resistance of additively manufactured occlusal splints

Journal of Dentistry, Cilt: 146, 2024 (SCI-Expanded)

Dimensional Stability of Additively Manufactured Dentate Maxillary Diagnostic Casts in Biobased Model Resin

Materials, Cilt: 17, Sayı: 9, 2024 (SCI-Expanded)

Effect of partially stabilized zirconia thickness on the translucency and microhardness of resin cement

Journal of Prosthetic Dentistry, Cilt: 131, Sayı: 1, 2024 (SCI-Expanded)

Effects of post-polymerization conditions on color properties, surface roughness, and flexural strength of 3D-printed permanent resin material after thermal aging

Journal of Prosthodontics, 2024 (SCI-Expanded)

Optical properties, biaxial flexural strength, and reliability of new-generation lithium disilicate glass-ceramics after thermal cycling

Journal of Prosthodontics, Cilt: 32, Sayı: 9, 2023 (SCI-Expanded)

Fabrication trueness and internal fit of hybrid abutment crowns fabricated by using additively and subtractively manufactured resins

Journal of Dentistry, Cilt: 136, 2023 (SCI-Expanded)

Color stability, surface roughness and flexural strength of additively manufactured and milled interim restorative materials after aging

Odontology, Cilt: 111, Sayı: 3, 2023 (SCI-Expanded)

Translucency, color stability, and biaxial flexural strength of advanced lithium disilicate ceramic after coffee thermocycling

Journal of Esthetic and Restorative Dentistry, Cilt: 35, Sayı: 2, 2023 (SCI-Expanded)

Stress behavior of an anterior single implant restored with high-performance polymer abutments under immediate and delayed loading: A 3D FEA study

Journal of Prosthodontics, Cilt: 32, Sayı: 2, 2023 (SCI-Expanded)

Effect of Thermomechanical Aging on the Surface Roughness and Color Stability of Novel CAD-CAM Materials: An In-Vitro Study

Clinical and Experimental Health Sciences, Cilt: 13, Sayı: 385, 2022 (ESCI)

Effect of printing orientation on the fracture strength of additively manufactured 3-unit interim fixed dental prostheses after aging

Journal of Dentistry, Cilt: 124, 2022 (SCI-Expanded)

Fracture Resistance of Single-Unit Implant-Supported Crowns: Effects of Prosthetic Design and Restorative Material

Journal of Prosthodontics, Cilt: 31, Sayı: 4, 2022 (SCI-Expanded)

Wear behavior of current computer-aided design and computer-aided manufacturing composites and reinforced high performance polymers: An in vitro study

Journal of Esthetic and Restorative Dentistry, Cilt: 34, Sayı: 3, 2022 (SCI-Expanded)

Evaluation of the Effect of Different Abutment Materials on the Final Color of the Restoration After Aging: An In Vitro Study

International Journal of Prosthodontics, Cilt: 35, Sayı: 5, 2022 (SCI-Expanded)

Fracture Resistance of Zirconia, Polyetheretherketone, and Polyetherketoneketone Implant Abutments After Aging

International Journal of Oral and Maxillofacial Implants, Cilt: 36, Sayı: 2, 2021 (SCI-Expanded)

Retention systems used in maxillofacial prostheses: A review

Nigerian Journal of Clinical Practice, Cilt: 22, Sayı: 12, 2019 (SCI-Expanded)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar 4

Trueness and Internal Fit of Additively Manufactured Interim Crowns

FDI World Dental Congress 2024, Türkiye - İstanbul, 12 - 14 Eylül 2024

Eklemeli Üretimle Üretilen Zirkonyanin Vickers Mikrosertliğinin Değerlendirilmesi: Pilot Çalışma

Çukurova Üniversitesi, Diş Hekimliği Fakültesi 2. Uluslararası Eklemeli İmalat Kongresi (IDCAM 2024), Türkiye - Adana, 30 Mayıs - 01 Haziran 2024

Retention ­of ­additively ­and ­subtractively ­manufactured ­polyetheretherketone­ to titanium ­base ­abutment: ­A ­pilot ­study

30th Annual Scientific Meeting of the European Association for Osseointegration, Almanya - Berlin, 28 - 30 Eylül 2023

Evaluation of Trueness of 3D-Printed Custom Open Trays For Single Implant Impressions

46th EPA Congress, Litvanya - Vilnius, 14 - 16 Eylül 2023

Kitap & Kitap Bölümleri 2

GÜNCEL PROTETIK DIŞ TEDAVISI ÇALIŞMALARI - Porselen Laminate Veneerlerin Klinik Performansı

Mesleki Kitap, Akademisyen Yayınevi, İstanbul, 2020

GÜNCEL PROTETİK DİŞ TEDAVİSİ ÇALIŞMALARI - MAKSİLLOFASİYAL PROTEZLERDE KULLANILAN MATERYALLERE GENEL BAKIŞ VE GÜNCEL TEKNİKLER

Mesleki Kitap, Akademisyen Yayınevi, İstanbul, 2020